Edge banding manufacturers introduce the types of furniture edge banding

Modern furniture emphasizes practicality and aesthetics. Edge banding can effectively prevent injuries in daily use, and also has a decorative effect to a certain extent. It is beautiful and generous. Edge banding has become the standard configuration for most furniture. Next,Linyi Lianmao International Trade Co.Ltd. will tell you about the types of furniture edge banding.
1. Wood veneer edge banding
The above high-quality natural birch, oak, maple, beech, cherry, and other wood are machined and cut into thin pieces of wood to seal the edges. The wood grain is natural, soft, unchangeable, and has strong adhesion when pasting. Wood veneer edge banding has good adsorbability after being bonded to furniture panels, especially when bonded to wood panels. Specification: The thickness is 0.1~0.3mm, the width is 20mm~80mm (special width can also be customized and processed), and the length is generally 2000mm. Due to the thin wood veneer edge banding strip and the different fiber densities of different woods, the wood veneer edge banding strip also has defects that are easy to break and tear, but the above defects can be remedied through the back gum coating treatment.
2. PVC edge banding
A wood grain, transparent, plain, and two-color series of plastic edge banding strips made from polypropylene or polyvinyl chloride by mechanical pressing. It has the characteristics of heat resistance, oil resistance, strength, hardness, and high flexibility; Its surface performance is good, wear-resistant, and can be trimmed; The surface effect is also good, and its patterns and colors can have a natural wood color similar to that of logs, as well as other color patterns; PVC edge banding strips with a mesh or coating treatment on the bottom surface also have a good bonding effect. Its specification: thickness is 0.2~3mm, width is 19-50mm, length is 1000mm, one roll. PVC edge banding strips with a thickness of more than 2mm have a certain amount of stress, and must be heated to soften or increase the temperature of the adhesive during use, otherwise they may fall off due to poor adhesion due to stress.
3. Melamine edge banding
Use high-quality colored base paper to print various artistic patterns such as wood grain, flower grain, leather grain, marble grain, etc. (or pure plain color), and then use modified melamine resin to impregnate and solidify the paper edge banding. It has the characteristics of abrasion resistance, fire prevention, oil resistance, moisture resistance, acid and alkali resistance, and has the advantages of excellent flexibility, strong adhesion after adhesion, and is not easy to fall off. Its specification: thickness is 0.2~0.4mm, width is about 25mm, and length is 1000~2000mm. Melamine edge banding has excellent bending performance, which will be better when heated, but it has defects that are easy to break.