Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Testing methods for furniture edge seals
Release time:
2023-03-23
Check whether the surface of the furniture edge banding is smooth and flat, and whether there are any miscellaneous spots. If there are spots or fine needle holes, it may be made of recycled miscellaneous PVC. Check whether the back of the edge banding strip is flat.
Check whether the surface of the furniture edge banding is smooth and flat, and whether there are any miscellaneous spots. If there are spots or fine needle holes, it may be made of recycled miscellaneous PVC. Check whether the back of the edge banding strip is flat. You can use a flat blade to clamp the edge banding strip crosswise to see if it is straight. If it is not, thick adhesive lines will appear on both sides after edge banding. If the back of the edge banding strip is flat and there are still thick adhesive lines after edge banding, the following method can be used to check: Check whether the sawn surface of the plate is flat. If the specifications of the upper and lower saw blades are different when sawing, there are small steps on the sawing surface, which affects the edge sealing. Check whether the hot melt adhesive coating is too thick. Check whether the thickness and pressure adjusted by the edge banding machine are coordinated. Use a small section of the edge banding strip to seal the edges, then tear it hard to check whether the adhesive strength between the edge banding strip and the thermosol is reasonable and uniform. If the strength is insufficient, check whether the temperature of the thermosol of the edge banding machine meets the use standard.
Whether the side surface of the plate is uniform after trimming, and if there is sawtooth shape, it may be due to the following reasons: the trimming knife is too blunt; The edge banding is too hard; The edge banding strip contains too much calcium carbonate. Scribe the edge banding strip with a nail or other tool. If there is any damage, the surface abrasion resistance and hardness of the edge banding strip do not meet the standards, indicating that the quality of the edge banding strip is unqualified.
Latest News
Edge banding manufacturers introduce the types of furniture edge banding
Modern furniture emphasizes practicality and aesthetics. Edge banding can effectively prevent injuries in daily use, and also has a decorative effect to a certain extent. It is beautiful and generous. Edge banding has become the standard configuration for most furniture. Next,Linyi Lianmao International Trade Co.Ltd. will tell you about the types of furniture edge banding.
2025-08-05
THE APPLICATION OF EVA HOT MELT ADHESIVE IN THE PVC EDGE BANDING INDUSTRY
EVA (Ethylene Vinyl Acetate) hot melt adhesive plays a crucial role in the PVC edge banding industry. This adhesive type is widely used due to its excellent bonding strength, flexibility, and cost-effectiveness. PVC edge banding is an essential process in furniture manufacturing, ensuring durability, aesthetics, and protection of exposed edges. The quality of edge banding largely depends on the adhesive used, making EVA hot melt adhesive a preferred choice.
2025-02-25
UNDERSTANDING EVA HOT MELT ADHESIVE: PROPERTIES, APPLICATIONS, AND ADVANTAGES
EVA (Ethylene Vinyl Acetate) hot melt adhesive is a widely used thermoplastic adhesive known for its fast bonding capabilities and versatility. It is commonly used in industries such as packaging, woodworking, bookbinding, and textiles.
2025-02-21
INTRODUCTION TO ABS EDGE BANDING
ABS (Acrylonitrile Butadiene Styrene) edge banding is a widely used material in furniture manufacturing and interior design. It serves as a protective and decorative covering for the exposed edges of wood-based panels, enhancing both durability and aesthetics.
2025-02-11
THE IMPORTANCE OF CHOOSING THE RIGHT GLUE FOR PVC EDGE BANDING
PVC edge banding has become a popular choice for enhancing the durability and aesthetics of furniture. Whether used in kitchens, offices, or living spaces, PVC edge bands provide a seamless and professional finish to panel edges. However, the success of this application heavily depends on the glue used during the installation process. Choosing the right adhesive ensures strong bonding, durability, and an attractive appearance.
2025-01-15
INTRODUCTION TO PVC EDGE BANDING MACHINES
PVC edge banding machines are essential tools in the furniture manufacturing and interior design industries. These machines are specifically designed to apply PVC edge banding to raw panel edges, ensuring a smooth, professional, and durable finish.
2025-01-11